Binance wikipedia

Engine Operating Temperature refers to the temperature of the engine during operation,Binance wikipedia which is an important parameter of engine performance. One.Engine operating temperature has a great impact on engine performance, so engineers and technicians need to pay attention to this parameter. Engine working temperature measurement Engine working temperature measurement requires accurate and timely measurement means to ensure that each component operates within the appropriate temperature range. Generally, there are three ways to measure engine temperature: 1. The probe measurement probe is threaded on the surface of the engine, and the receiver is fixed on the hood of the engine to measure the temperature of the surface of the engine. Two. The thermocouple measurement thermocouple is attached to the surface of the engine, which can respond quickly when standby, and can record instantaneous temperature changes. Thermocouples can also provide reliable temperature assessments based on real-time data to ensure that engine parts operate within the appropriate temperature range. 3. Optical fiber sensor measures optical fiber sensingThe device can be used to measure the temperature of high-temperature application environments (such as engines and turbines) and allows multiple sensor configurations on the same hotspot. In addition, the optical fiber sensor can also detect ordinary strain and temperature changes at the same time. How to affect the engine performance and change the working temperature of the engine will have different effects. In some applications, increasing the operating temperature of the engine can improve fuel efficiency, but this effect is not different from all engine applications. Here are some general effects: 1. The fuel efficiency is within a specific temperature range, and the fuel efficiency of the engine is the highest. If it is too low or too high, the efficiency of the smooth flow of fuel will be reduced, and the fuel consumption of the engine will also increase. If the operating temperature of the engine is too low, the fuel consumption may increase by about 20%, and if the temperature is too high, it will also lead to higher fuel consumption.Two. Cold start problem The engine cold start problem is caused by the inability of fuel to flow evenly at low temperatures. In order to solve this problem, some engines use heat treatment technology or preheating devices to make the engine surface reach the appropriate temperature. This can help mobility and reduce engine wear. 3. Lubricating oil engine lubricating oil is applied and cooled on the surface of the engine to resist heat. Increasing the engine temperature will help ensure the quality and performance of the engine lubricating oil. Four. Engine wear When the operating temperature of the engine is below the appropriate level, the coating of the oil film on the friction surface may be insufficient, so the wear will increase. Excessive temperature will cause the engine parts to expand, causing the friction between the parts to increase and the risk of wear. Summarizing the working temperature of the engine is one of the important parameters affecting the performance of the engine.After proper measurement and analysis, the appropriate temperature range can be determined to ensure that the engine runs in the best state. For different types of engine applications, the relationship between engine operating temperature and fuel efficiency, cold start problems, lubricating oil and engine wear should be understood, and corresponding adjustments and improvements should be made according to the required performance.

Contact Us
Phone：020-83484658