OKX review

List of contents of this article:

• 1. Is the BYD F3 a Mitsubishi engine?
• 2, How is the quality of the BYD F3 engine? Solution
• 3, What engine does BYD f3 use

Is the BYD F3 a Mitsubishi engine?

1, F3 is now using Dongan Mitsubishi 4G15S engine, with a displacement of 5L and power of 78Kw. Its top-equipped 8L model uses the 8L483QB engine independently developed by BYD;However, in the early days of F3, Toan Mitsubishi's 4G18 engine was used, with a displacement of 6L and a power of 75Kw.

2. BYD f3 engine model F3 now uses Dongan Mitsubishi 4G15S engine, with a displacement of 5L and power of 78Kw. Its top-equipped 8L model uses the 8L 483QB engine independently developed by BYD; however, in the early days of F3, Dongan Mitsubishi's 4G18 engine was used, with a displacement of 6L and power of 75Kw.

3. It is Mitsubishi technology, but it is not the original Mitsubishi, nor is it provided by Mitsubishi. It's just that Mitsubishi sold the drawings of this engine to Dong'an, a Chinese engine manufacturer, which is produced by Chinese manufacturers.

How is the quality of the BYD F3 engine? Solution

Excellent power performance: BYD F3 is equipped with a 5T engine independently developed by BYD, which has excellent power performance. The engine performs well in terms of maximum power and torque, and can provide sufficient power output. BYD F3 performs stably when driving at high speed, with rapid acceleration response and low fuel consumption control.

Generally, there are the following typesSituation: 3360 water temperature sensor failure, carbon accumulation in the valve and air intake, oil problems, deviation in cylinder conditions, unstable oil pressure, or too long service life of the car. According to the content of the above article, we can know where the BYD f3 engine is made. In fact, it belongs to the domestic brand engine.

First, the quality and reliability of spare parts of F3 are not high. Compared with some international brand models, BYD F3 spare parts are relatively fragile and have a high failure rate. For example, the engine shell and bumper are easily damaged and need to be replaced; the door seal is easy to age and deform, resulting in air leakage; the seat fabric and thread are relatively poor and easy to damage.

BYD F3 fully integrates the brand concept of BYD pragmatism, and the quality is convincing. Excellent power performance BYDThe F3 is equipped with a 5T engine independently developed by BYD, with a maximum power of 105kw and a maximum torque of 210N·m.

%, and aluminum alloy material is used, and the new car is equipped with front McPherson independent suspension and rear multi-link suspension. The cylinder block of BYD f3 engine is made of aluminum alloy. The cylinder block has high strength, high rigidity, good stability, strong oxidation resistance, can prevent rust, and at the same time can reduce weight, and the quality is also very good.

The BYD f3 engine is very good. The 2015 BYD f3 engine has a maximum power of 75kW and a maximum torque of 146Nm. It adopts 16-gal valve DOHC technology, which meets the national IV emission standards, and the comprehensive fuel consumption per 100 kilometers is 6L. The engine has good performance and low fuel consumption.

What engine does BYD f3 use

1. The BYD f3 produced in the year uses a Mitsubishi engine. The models of the Mitsubishi engine used in f3 are 4G15-4L, 4G15-4D, manual transmission 5L, and the electronic control system is different. The automatic transmission uses 4G18.

2. The new platinum version of BYD F3 uses the BYD473QB engine. At present, F3 is equipped with a 473QB engine developed by BYD itself. The technical prototype of this engine is the old Honda 5L engine. Although the technical content is average, the tuning is good, and it is easy to start and drive.

3. This engine is a Mitsubishi 4G15S engine, and the core technology is Mitsubishi, and Harbin Dong'an Automobile startsProduced by Machine Manufacturing Co., Ltd., the domestic technology has matured. BYD used to be equipped with a 4G18 engine, and many models are now using this machine, such as Junjie FRV, horse racing, etc.

4. F3 is now using Dongan Mitsubishi 4G15S engine, with a displacement of 5L and power of 78Kw. Its top 8L model uses the 8L483QB engine independently developed by BYD; but in the early days of F3, it uses Dongan Mitsubishi's 4G18 engine, with a displacement of 6L and 75Kw.

5. The BYD F3 Mitsubishi-style engine adopts an all-aluminum alloy 16-ve engine, which has the characteristics of energy-saving, high efficiency, light weight and environmental protection. The all-aluminum alloy material makes the engine more durable and can provide better heat dissipation performance.