OKX review

List of the catalog of this article:

• 1,OKX review How to remove the anti-theft lock system of the car engine?
• 2, How to remove the engine anti-theft lock stop light?
• 3, How to remove the car engine anti-theft lock
• 4, EngineAnti-theft lock
• 5, How to release the engine anti-theft lock stop light keeps flashing

How to remove the anti-theft lock system of the car engine?

Engine anti-theft lock removal method: first disconnect the negative pole of the battery for a period of time, wait for the protection data of the engine to be emptied before reconnecting. Generally, the power is cut off for about 10 seconds. If it's stillThe same state means that there is no sufficient discharge and it needs to be removed again. Just wait for a while this time.

The method of removing the engine anti-theft lock is to disconnect the negative pole of the battery for a period of time. After the engine's warranty data is emptied, the battery is reconnected, and the power is cut off for about 10 seconds. The engine anti-theft lock is a set of anti-theft system installed for the engine. Even if the door can be opened, the car cannot be driven away, which improves the anti-theft function of the car.

"Provide you with the following relevant content: How to remove the engine anti-theft lock system: unplug the general insurance. If you don't know the general insurance, disconnect the battery cable to release it; a key-like symbol is displayed on the dashboard. When the power supply self-check is turned on, it will be turned off after the self-test is passed.

Engine anti-theft systemThe unified release still depends on the model. The release method of different models is different: the engine anti-theft locking system is composed of a transmitter transponder key control unit, an engine control unit ECM, a transmitter transponder key amplifier and an ignition key with a transmitter transponder chip.

First, open the door, enter the cab, step on the brake pedal, press the one-button start button, and start the engine. When the central control and dashboard light up, it proves that the engine has started. Then press and hold the unlock button on the door. For 10 seconds, the Baojun 730 engine can be unlocked for theft.

The steps to remove the engine anti-theft lock are: turn on the car, open the key, and ensure the power-on state; wait until the anti-theft light on the instrument flashes, observe the instrument; turn off the power of the car, wait for about ten minutes, and then turn on the power of the car;At this time, the anti-theft light is flashing, and then repeat the above operation three times.

How to remove the engine anti-theft lock stop light?

1. Solution to this kind of failure cause: the fault can be solved after replacing the key battery, but for some models that still cannot solve the fault after replacing the battery, it means that the data in the key chip is lost. At this time, you only need to rematch the remote control key.

2. You can turn off the power again and wait longer before reconnecting. If the owner fails to try the last method, he/she needs to call a trailer to deliver the vehicle to the designated 4S store, or ask the maintenance personnel of the 4S store to come to the door.

3. [Pacific Automobile Network] The indicator light of the car engine anti-theft system is on. If this happens, it means that the electronic anti-theft system of the car engine is faulty. It is necessary to initialize and reset the electronic anti-theft system of the car engine to eliminate this problem.

4. The method of removing the engine anti-theft lock system: unplug the general insurance. If you don't know the general insurance, disconnect the battery cable to release it; a key-like symbol is displayed on the dashboard. When the power supply self-check is turned on, it will be turned off after the self-test is passed.

How to release the anti-theft lock of the car engine

How to release the engine anti-theft lock: first put the negative pole of the battery Disconnect for a period of time, wait for the protection data of the engine to be emptied before reconnecting. Generally, the power will be cut off for about 10 seconds. If it is still in the same state, it means that there is no sufficient discharge and it needs to be removed again. Just wait for a while this time.

First, turn on the car, open the key, and ensure the power-on state; then wait until the anti-theft system light on the instrument flashes, observe the instrument; then turn off the power of the car, wait for about ten minutes, and then turn on the car power; at this time, the anti-theft system light will flash, and then repeat the above operation three times. .

How to remove the engine anti-theft lock: first disconnect the negative pole of the battery for a period of time, wait for the protection data of the engine to be emptied before reconnecting. Generally, it is enough to cut off the power for about 10 seconds.

The method of removing the car engine anti-theft system is as follows: open the engine hood, look for the alarm, and you will find where it is by referring to the car maintenance manual. Usually, the car's anti-theft computer is installed under the steering wheel, and the central junction of the anti-theft device unplugs the power input cable.

First, turn on the car, open the key, and make sure it is energized. Then wait until the anti-theft light on the instrument flashes, observe the instrument. Then turn off the power of the car, wait for about ten minutes, and then turn on the power of the car. At this time, the anti-theft light will flash, and then repeat the above operation three times.

Engine anti-theft lock

The engine can only be started with the original car key to prevent the vehicle from being stolen and ensure safety. Disadvantages of engine anti-theft lock · If the key fails, you can only start the engine after using the spare key or repair.

First, turn on the car, open the key, and ensure the power-on state; then wait until the anti-theft system light on the instrument flashes, observe the instrument; then turn off the power of the car, wait for about ten minutes, and then turn on the car power; at this time, the anti-theft system light will flash, and then repeat the above operation three times. .

The removal method of the engine anti-theft lock light is always on: first disconnect the negative pole of the battery for a period of time, wait for the protection data of the engine to be emptied before reconnecting. Generally, the power can be cut off for about 10 seconds.

The way to make the engine anti-theft lock light shine is: it is estimated that it is a problem with gasoline.

How to remove the engine anti-theft lock stop light keeps flashing

1. First, turn on the car, turn on the key, and ensure the power-on state; then wait until the anti-theft system light on the instrument flashes, observe the instrument; then turn it off The power supply of the car, wait for about ten minutes, and then turn on the power supply of the car; at this time, the anti-theft system light will flash, and then repeat the above operation three times.

2. According to the easy car display, the engine anti-theft indicator light keeps flashing. The method is: first disconnect the negative power of the battery for a period of time, wait for the engine protection data to be cleared before reconnecting. Generally, the power is cut off for about 10 seconds. If the same state cannot be fully discharged, it needs to be cleared again. At this time, just wait for a period of time.

3. The flashing of the anti-theft light indicates that the engine anti-theft has begun to work, which is a normal phenomenon and does not need the owner to turn it off. Of course, it can also be turned off. Just unplug the tail of the lamp and plug it in.

4. The light of the engine anti-theft locking system is on. If it is always on and does not go out, it should be considered that the engine electronic anti-theft system has failed. The electronic anti-theft system of the car engine can be initialized, so as to eliminate the engine anti-theft system indicator light.

5. The anti-theft light will flash every 1 to 2 seconds, indicating that the engine anti-theft system is working and does not need to be released. If it must be released, just plug and unplug the tail of the lamp. It is normal for the car engine anti-theft light to flash at a frequency of 1 to 2 seconds.