1. Solution Open the "My Computer" - "Tools" - "Folder" options in turn, remove "Use Simple TextCheck the box in front of "Piece Sharing", you can right-click in the NTFS format disk, and the security options will be displayed in the property menu.
2. When the SD card or USB flash drive of the mobile phone is inserted into the computer, if the message "the file or directory is damaged and unreadable" is displayed, we first need to repair the directory of the SD card or USB flash drive of the mobile phone. Insert the USB flash drive to be repaired, open "My Computer", and find the disk symbol where the SD card or USB flash drive is located.
3. For this problem, I think we can try to fix it with the built-in tool of disk character repair on the computer, or use the relevant service code in operation to repair it.
1. The solution is: format the damaged volume or partition.After connecting the mobile device to the computer, start Windows Explorer, right-click the drive, and click "Format". Select "File System" according to actual needs and check the "Quick Formatting" option. Finally, click "Start" to format the drive.
2. First of all, this kind of failure occurs because the partition table of the hard disk is damaged. If you want to retrieve the data in the previous disk, you can use the boot disk to boot into DOS mode first, and then use Format to format the disk. In this way, the partition can generally be repaired after formatting.
3. Solution Open the "My Computer" - "Tools" - "Folder" options in turn, remove the check mark in front of "Use Simple File Sharing", and you can right-click in the NTFS format disk to display security options in the properties menu.
4. Start-Run-Enter-Enter-Enter after the command prompt, enter chkdsk[disk symbol]: /f (there is a space in front of the disk symbol) Press Y-Enter the driver computer will automatically detect disk errors. Just wait - restart.
5. Some will pop up a message box in the lower right corner of the screen, prompting "A certain file has been damaged and cannot be read, please run the Chkdsk tool" and so on.
6. After that, start repairing the disk. After waiting, the problem of "the file or directory has been damaged and cannot be read, please run the chkdsk tool to repair" can be solved. Method: Click the "Start" menu, find the "Run" option in the menu, and click Open. Enter the "cmd" command in the pop-up dialog box and click the "OK" button.
1. Or after my computer, click Tools-Folder Options-View. There are two settings in it. Hide the protected system file before Uncheck it, display all the files below the selection, and then apply OK to see the hidden files.
2. Check the two options x0dx0ax0dx0a, and then it will prompt that the disk check cannot be executed. It will be automatically scanned the next time it starts up. Click "Yes".
3. The file structure of the disk system has been damaged and cannot be used. Please run the Chkdsk tool on volume C. The specific steps for running are as follows: The materials we need to prepare are: computer, first we open the operation in the start icon in the lower left corner of the computer.
4. It can be opened in the following ways: click "Start", click "Run", enter cmd and enter the command prompt window; enter the following command in this window: for example, check and repair the D partition: chkdsk D: /f Enter to start chkdsk magnet The disk inspection tool scans the D partition and checks other partitions similarly.
5. Disk repair: Open the computer, right-click on the disk that needs to be repaired, and select "Properties". Click the "Tools" tab in the pop-up properties window, and then click "Start Check" in the error check. Check "Automatically Repair File System Error" in the pop-up disk repair window, and then click "Start".
6. This is caused by you often running some software that is easy to cause damage to the structure of the volume D file system.For example, I used to use a virtual machine. In disk D, disk D itself is fat32. The virtual machine often uses ntfs to create, delete, create, delete, and your situation will occur many times later.
Binance US-APP, download it now, new users will receive a novice gift pack.
1. Solution Open the "My Computer" - "Tools" - "Folder" options in turn, remove "Use Simple TextCheck the box in front of "Piece Sharing", you can right-click in the NTFS format disk, and the security options will be displayed in the property menu.
2. When the SD card or USB flash drive of the mobile phone is inserted into the computer, if the message "the file or directory is damaged and unreadable" is displayed, we first need to repair the directory of the SD card or USB flash drive of the mobile phone. Insert the USB flash drive to be repaired, open "My Computer", and find the disk symbol where the SD card or USB flash drive is located.
3. For this problem, I think we can try to fix it with the built-in tool of disk character repair on the computer, or use the relevant service code in operation to repair it.
1. The solution is: format the damaged volume or partition.After connecting the mobile device to the computer, start Windows Explorer, right-click the drive, and click "Format". Select "File System" according to actual needs and check the "Quick Formatting" option. Finally, click "Start" to format the drive.
2. First of all, this kind of failure occurs because the partition table of the hard disk is damaged. If you want to retrieve the data in the previous disk, you can use the boot disk to boot into DOS mode first, and then use Format to format the disk. In this way, the partition can generally be repaired after formatting.
3. Solution Open the "My Computer" - "Tools" - "Folder" options in turn, remove the check mark in front of "Use Simple File Sharing", and you can right-click in the NTFS format disk to display security options in the properties menu.
4. Start-Run-Enter-Enter-Enter after the command prompt, enter chkdsk[disk symbol]: /f (there is a space in front of the disk symbol) Press Y-Enter the driver computer will automatically detect disk errors. Just wait - restart.
5. Some will pop up a message box in the lower right corner of the screen, prompting "A certain file has been damaged and cannot be read, please run the Chkdsk tool" and so on.
6. After that, start repairing the disk. After waiting, the problem of "the file or directory has been damaged and cannot be read, please run the chkdsk tool to repair" can be solved. Method: Click the "Start" menu, find the "Run" option in the menu, and click Open. Enter the "cmd" command in the pop-up dialog box and click the "OK" button.
1. Or after my computer, click Tools-Folder Options-View. There are two settings in it. Hide the protected system file before Uncheck it, display all the files below the selection, and then apply OK to see the hidden files.
2. Check the two options x0dx0ax0dx0a, and then it will prompt that the disk check cannot be executed. It will be automatically scanned the next time it starts up. Click "Yes".
3. The file structure of the disk system has been damaged and cannot be used. Please run the Chkdsk tool on volume C. The specific steps for running are as follows: The materials we need to prepare are: computer, first we open the operation in the start icon in the lower left corner of the computer.
4. It can be opened in the following ways: click "Start", click "Run", enter cmd and enter the command prompt window; enter the following command in this window: for example, check and repair the D partition: chkdsk D: /f Enter to start chkdsk magnet The disk inspection tool scans the D partition and checks other partitions similarly.
5. Disk repair: Open the computer, right-click on the disk that needs to be repaired, and select "Properties". Click the "Tools" tab in the pop-up properties window, and then click "Start Check" in the error check. Check "Automatically Repair File System Error" in the pop-up disk repair window, and then click "Start".
6. This is caused by you often running some software that is easy to cause damage to the structure of the volume D file system.For example, I used to use a virtual machine. In disk D, disk D itself is fat32. The virtual machine often uses ntfs to create, delete, create, delete, and your situation will occur many times later.
Binance Download for PC Windows 10
author: 2025-01-10 14:00OKX Wallet app download for Android
author: 2025-01-10 13:42Binance app download Play Store
author: 2025-01-10 13:22233.78MB
Check727.34MB
Check769.48MB
Check278.54MB
Check781.29MB
Check438.34MB
Check689.49MB
Check912.68MB
Check983.79MB
Check658.63MB
Check156.42MB
Check381.62MB
Check633.98MB
Check575.73MB
Check139.47MB
Check666.31MB
Check768.97MB
Check569.88MB
Check178.56MB
Check799.83MB
Check478.77MB
Check818.91MB
Check626.26MB
Check812.29MB
Check748.43MB
Check461.36MB
Check371.95MB
Check877.83MB
Check957.82MB
Check347.58MB
Check662.64MB
Check945.81MB
Check272.81MB
Check496.53MB
Check477.42MB
Check145.58MB
CheckScan to install
Binance US to discover more
Netizen comments More
517 十字街头网
2025-01-10 13:32 recommend
2844 风驰电卷网
2025-01-10 13:30 recommend
671 嫁祸于人网
2025-01-10 13:21 recommend
2970 长街短巷网
2025-01-10 13:20 recommend
465 破颜微笑网
2025-01-10 12:53 recommend