Binance login

Engine cleaning oil (cleaning the internal oil scale of the engine to renew the engine) As a core component of a car,Binance login the normal operation of the engine is very important. However, due to long-term use, a lot of oil scale and carbon scale will accumulate inside the engine, which will not only affect the performance of the engine, but also reduce fuel efficiency, accelerate the wear of parts, and lead to the risk of failure. Therefore, it becomes crucial to clean the oil scale and carbon scale inside the engine.Many car manufacturers and car oil brands have launched engine cleaning fluid, which can effectively solve this problem while protecting the engine and prolonging its life. The principle of engine cleaning oil is to use the effect of some chemicals to dissolve the oil scale and carbon scale inside the engine, while cleaning and lubricating the surface of various parts of the engine. The use of cleaning oil is both convenient and safe, and can avoid the trouble of disassembling the engine for cleaning and the high maintenance costs. So, how to use the engine cleaning oil correctly? Here are some basic steps: 1. Choose a suitable engine cleaning oil. The composition and usage of different brands of engine cleaning oil are slightly different. You need to choose the cleaning oil suitable for your engine according to the specific situation of the car, and also avoid using expired or unqualified cleaning oil. Two. RenewBefore using the engine oil and oil filter to clean the engine oil, the engine oil and engine oil filter need to be replaced, otherwise the oil scale and carbon scale will be stirred and mixed with the engine oil by the cleaning oil, resulting in oil pollution and affecting the cleaning effect. 3. Pour the cleaning oil and start the engine. According to the product instructions, pour the cleaning oil into the oil filling port at the right time, and then start the engine and let it run for a period of time in an idle state. In this process, the cleaning oil will cycle to lubricate the entire engine, clean and dissolve oil scale and carbon scale, and suspend them in the oil. Four. After emptying the oil and cleaning the residue, the oil needs to be emptied and the oil mouth should be thoroughly cleaned. Because the chemicals in cleaning oil may cause damage to certain parts, the process of emptying and cleaning is essential. This is also an important reason for replacing the oil and oil filter.5. Finally, replace the oil and oil filter. Finally, remember to replace the oil and oil filter again to ensure that the oil scale and carbon scale inside the engine are completely removed, and no residue remains in the oil. Although engine cleaning oil is a very effective method, it should not be overused. It is recommended to use it every 1-2 years according to the usage of the car. In general, using engine cleaning oil is one of the simplest and safest ways to reduce engine oil scale and carbon scale. It can significantly improve the performance of the engine, extend the service life of the engine, and also maintain the health of the car. Of course, before using, you must first understand your car and product instructions, and follow the correct usage method.

Contact Us
Phone：020-83484658